Intermittent fault on a CCTV camera due to Rodent Rage

As a service company sometimes you can fall foul of similar problems faced by clients. Such as a little rodent rage, that may have cause an intermittent fault on a CCTV camera.

This intermittent fault on a CCTV camera was one that we (Veriserv) experienced in our own building. We had been struggling with an intermittent fault on the CCTV system fitted at the main office, until very recently when the camera concerned failed completely. An inspection quickly identified that the unit had lost power and that the camera was actually okay.

intermittent fault on a CCTV camera

Entering into the roof void we found a power supply that had suffered significant damage, from being gnawed by a rodent. In this case most likely a mouse. All rodents need to chew on harder items to control the length of their teeth. This is usually fine until they choose to gnaw on something in your property!
intermittent fault on a CCTV camera Power Supply gnawed by rodent
Ensuring a functioning CCTV system for some businesses is crucial to monitoring processes or shop floor activity. In the case of Pubs & Clubs it is often a requirement of their licensing condition that a fully functioning CCTV system is maintained at all times.

During a routine service, Veriserv engineers will inspect the various parts of the security system and advise the client where possible future failure may occur, or if any little guests have been visiting you. Any recommended remedial action will also be advised and we will identify the most economical route to repair incorporating the latest technologies, all installed by a fully certified engineer.

Our mission is to provide every single customer with an outstanding service that is fit for purpose and delivered by experts to reduce risk. As you can see from our other faults of the week, regular visits from a professional can cut down the risk of electrical faults, fire and disrupted security, to you and your workplace.

So if you know you are due a service, or have some concerns about your premises, please call 01543 225306, or fill out one of our contact forms to arrange a free assessment of your premises, with one of our fully trained engineers.

Leave a Reply

Your email address will not be published. Required fields are marked *